HPE 1420 16G Switch

Thiết bị mạng

HPE 1420 16G Switch

  • Tốc độ LAN 10/100/1000Mbps
  • Cổng giao tiếp 16 cổng 10/100/1000 ports
  • Kích thước: 10.47(w) x 6.38(d) x 1.73(h) in (26.6 x 16.2 x 4.4 cm) (1U height)
  • Trọng Lượng: 2.65 lb (1.2 kg )
  • 16 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,IEEE 802.3ab Type 1000BASE-T)
  • Media Type: Auto-MDIX;
  • Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T:Full only
  • Supports a maximum of 16 autosensing

Bảo hành: 12 Tháng
Giá: 3.415.000 VNĐ
Tư vấn bán hàng online Hà Nội:
- Mr Hiếu: 0912.899.054
- Mr Thắng: 0911.188.356
- Ms Hương: 0936.051.885
Tư vấn bán hàng online HCM:
- Mr Phi: 0934.073.381
- Ms Hà: 0919.969.491

HP 1420-16G Switch JH016A

-       The HP 1420 Switch Series consists of unmanaged Gigabit Ethernet switches for small businesses and others looking for plug-and-play basic Layer 2 connectivity for their network, including low-cost PoE+ and 10GbE uplink models. The HP 1420 Switch Series has four models: 16-port 10/100/1000, 24-port 10/100/1000 with two SFP Gigabit ports, 24-port 10/100/1000 ports of which 12 are PoE+ enabled (124 W PoE budget), and 24-port 10/100/1000 with two SFP+ 10GbE ports.


-       High-performance GbE Layer 2 Switching, Cost-effective and Easy to Deploy

-       The HP 1420 Switch Series offers small businesses and others Layer 2 Gigabit Ethernet switching with unmanaged affordability and plug-and-play simplicity.

-       Gigabit Ethernet is the most recommended and deployed networking technology today, delivering 10 times more performance than Fast Ethernet.

-       Unmanaged switches are the most economical offerings, ideal for locations needing only basic Layer 2 switching in a flat single tier network.

Model Choices to Meet Most Design Needs for Basic Layer 2 Networking

-       The 1420 Switch Series has four models to choose from, all with Gigabit performance but offering different uplink options. Consider the 16-port model for locations needing fewer connections and one of the 24-port models where more connectivity is required.

-       The HP 1420-24G-2SFP model with SFP uplinks is ideal where Gigabit fiber is required, while the HP 1420-24G-2SFP+ 10G Uplink model with SFP+ uplinks is available where 10GbE is needed now or in the future.

-       Anticipate the installation of IP voice, wireless Access points, or video surveillance cameras by deploying Power over Ethernet (PoE). Choose the PoE+ model for highly cost-effective PoE deployments.

-       All 1420 Switch Series models are fanless for silent operation, usable in office settings around workers. Units have internal power supplies with power-cord plug-in simplicity.

-       Units can be deployed for desktop operation or can be rack mounted.

Automated Features for Hands-off Operation

-       All models are plug-and-play with zero configuration and no required ongoing administration.

-       The HP 1420 Switch Series has the company's only unmanaged PoE model, with fully automated support for powering compatible IP phones, video surveillance cameras or wireless Access Points.

-       The HP 1420-24G-2SFP+ 10G Uplink Switch requires no configuration beyond installation of optional 10GbE transceivers to achieve 10GbE speeds. Alternatively, use today with Gigabit SFP transceivers if higher performance is merely a future requirement.

-       IEEE 802.1p prioritization and other QoS features automate the preferred handling of high priority traffic, including Differentiated Services Code Point (DSCP) set priorities.

-       The 1420 Switch Series supports Jumbo packets to improve the performance of large data transfers.