DWL-3610AP/ESGPC Wireless Selectable Dual‑Band Unified Access Point

Thiết bị mạng

DWL-3610AP/ESGPC Wireless Selectable Dual‑Band Unified Access Point

  • Wireless AC Selectable Dual-band Gigabit PoE Access Point
  • (2.4GHz: 300Mbps or 5GHz: 867Mbps; 3dBi internal antenna for 2.4GHz, 3dBi internal antenna for 5GHz, 802.3af PoE, PoE injector is NOT included)
  • Standalone/Managed mode, Plastic Housing, H/W: A1

Bảo hành: 24 Tháng
Giá: 13.350.000 VNĐ

Versatile Selectable Dual‑Band Access Point.


The DWL-3610AP Wireless Selectable Dual-Band Unified Access Point provides high bandwidth and flexibility for medium to large scale Wi-Fi networks.

DWL-3610AP Wireless Selectable Dual‑Band Unified Access Point

Key Features

DWL-3610AP selectable band
Selectable band1


Universal 2.4 GHz or less congested 5 GHz wireless band


DWL-3610AP wireless controller
Wireless controller


Compatible with D‑Link's Wireless controller and Unified Switch


DWL-3610AP self configuring cluster
AP-Array support


Multiple APs can be set to form self-configuring clusters


AP Array
Automatic RF Management


Automaticly set non-interfering channels


DWL-3610AP stand alone clustered

Standalone, Clustered or Centrally Managed


The DWL-3610AP can be used as a standalone Access Point, clustered or centrally managed via a D-Link Wireless Controller or Unified Switch. Central management allows for a large number of APs to be deployed and managed easily and efficiently.

AP Array


The DWL-3610AP self-configuring cluster allows a small number of access points to be set to form a self-configuring cluster. Once the administrator configures one access point, the same configuration is automatically applied to all remaining APs.

DWL-3610AP self configuring cluster

Automatic RF Management


Access points in close proximity usually experience interference between channels where RF Management is not implemented.

When a DWL-3610AP senses a neighbour nearby, it will automatically select a non-interfering channel. This greatly reduces RF interference and allows APs to be deployed more densely.

To further minimise interference, when a nearby AP is on the same channel, the DWL-3610AP will automatically lower its transmission power3.

When, for whatever reason, the nearby AP is no longer present, the DWL-3610AP will increase its transmission power to expand coverage.

DWL-3610AP RF management
DWL-3610AP greater reach

Greater Reach and Flexibility


The internal omnidirectional antenna eliminates dead spots and fills hard-to-reach places. Selectable radio mode allows the DWL-3610AP to work on either the 2.4 GHz band or 5 GHz band. Airtime fairness ensures that equal airtime is given to each client, providing increased performance even if slower devices are connected.

Quality of Service


The DWL-3610AP supports 802.1p Quality of Service (QoS) for enhanced throughput and better performance of time-sensitive traffic like VoIP and video conferencing.

Furthermore, when a number of DWL-3610AP units are in close proximity to each other, an access point will refuse new clients once its resources are fully utilised, allowing the association request to be picked up by a neighbouring unit, distributing the load over multiple APs.

DWL-3610AP QoS



1. The access point can only operate on an individual band at any given time. It does not broadcast both bands simultaneously. If you are looking for a concurrent dualband access point please look at DWL-6610AP. 2. Maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors may adversely affect wireless signal range. 3. This feature is available when Unified AP is used in conjunction with D-Link’s line of Unified Wireless Switches/controllers.